HP LaserJet M2727 MFP - Software Technical Reference

Because you can set the number of copies from some software programs, conflicts can arise between
the software program and the printer driver. In most cases, the software program and the printer driver
communicate, so that the number of copies set in the software program will appear in the printer-driver
settings. For some software programs, this communication does not happen, and the number of copies
settings are treated independently. For these software programs, setting 10 copies in the software
program and then setting 10 copies in the printer driver will result in 100 copies (10 x 10) being printed.
It is recommended that you set the number of copies in the software program, whenever possible.
Graphic
●
TrueType Font settings
TrueType Font settings
This option specifies the TrueType font settings. The following settings are available:
●
Substitute with Device Font (default). This setting causes the product to use equivalent fonts for
printing documents that contain TrueType fonts. This permits faster printing; however, special
characters that the product fonts do not support might not print correctly.
●
Download as Softfont. This setting causes TrueType fonts to be downloaded and used for
printing, instead of using the product fonts.
Document Options
●
Advanced Printing Features
●
Print Optimizations (HP PCL 6 printer driver only)
●
PostScript Options (HP postscript level 3 emulation printer driver only)
●
Printer Features
●
Layout Options
Advanced Printing Features
When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and
Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are available,
depending on the product. For normal printing, leave the Advanced Printing Features setting
Enabled. If compatibility problems occur, disable the feature. Some advanced printing features might
still be available in the printer driver, even though they have been disabled. If you select an advanced
printing feature in the printer driver that has been disabled on the Advanced tab, the feature is
automatically turned on again.
Print Optimizations (HP PCL 6 printer driver only)
The default setting for Print Optimizations is Enabled. When this feature is enabled and the document
to be printed contains overlapping text and graphics, text placed on top of a graphic might not print
correctly. If the printed output is not correct, disable this feature. When disabled, print optimization
features, such as substituting device fonts for TrueType fonts and scanning for horizontal and vertical
rules, are turned off.
PostScript Options (HP postscript level 3 emulation printer driver only)
●
PostScript Output Option
ENWW HP PCL 6 and HP postscript level 3 emulation printer drivers for Windows 245
HP printer drivers for
Windows