HP LaserJet M2727 MFP - Software Technical Reference

◦
Confirm Get Community name: Retype the SNMP Get Community Name (password) to
allow SNMP information to be read from the product.
◦
Disable SNMP v1 default Get Community name of “public”. Select this option to disable
the default Get community name "public". If you select this option, you will need to type values
in the Get Community name and Confirm Get Community name fields.
●
Enable SNMP v1 read-only access (uses “public” for the Get Community value). Select this
option to enable the SNMP V1 agents on the product, but limit access to read-only. Write-access
is disabled. The default Get Community name "public" is automatically enabled.
●
Disable SNMP v1. Select this option to disable the SNMP V1 agents on the product, which is
recommended for secure environments. If SNMP V1 is disabled, some port monitors or discovery
utilities might not operate properly.
NOTE: Click Apply for the changes to take effect.
Other screens
The following table lists screens that are also available through HP ToolboxFX.
Screen Access
HP Instant Support Click the HP Instant Support link in the Other Links box that
appears on all HP ToolboxFX and HP EWS screens.
Support and Troubleshooting Click the Support and Troubleshooting link in the Other
Links box that appears on all HP ToolboxFX and HP EWS
screens.
Product Registration Click the Product Registration link in the Other Links box
that appears on all HP ToolboxFX and HP EWS screens.
About HP ToolboxFX Click the HP logo that appears in the upper-left corner of the
HP ToolboxFX screens.
Shop for Supplies Click the Shop for Supplies link in upper-right corner on all
HP ToolboxFX screens.
About HP ToolboxFX dialog box
Click the HP logo in the HP ToolboxFX heading banner on any HP ToolboxFX screen to gain access to
the About HP ToolboxFX dialog box. This dialog box shows the software version number and a
ENWW HP ToolboxFX 89
Software description