HP LaserJet M2727 MFP - Software Technical Reference
CAUTION: If you set a community name to anything other than “public”, scanning will not function on
the product.
Figure 2-48 SNMP screen
The following options are available on the SNMP screen:
●
Enable SNMP v1 read-write access. Select this option to enable SNMP V1 agents on the product.
Custom community names can be configured to control management access to the product.
◦
Set Community name: Type the SNMP Set Community Name (password) to allow SNMP
information to be configured (or written) on the product.
◦
Confirm Set Community name: Retype the SNMP Set Community Name (password) to
allow SNMP information to be configured (or written) on the product.
◦
Get Community name: Type the SNMP Get Community Name (password) to allow SNMP
information to be read from the product.
88 Chapter 2 Software description ENWW