HP LaserJet M2727 MFP - Fax Tasks

HP LaserJet M2727 MFP Series – Fax

Development Company, L.P.

www.hp.com

How do I? Steps to perform

Fax from the automatic document feeder

(ADF)

1 Insert the top-end of the stack of originals into the

document feeder input tray, with the media stack face-

up and the first page to be copied on top of the stack.

Slide the stack into the ADF until it does not move any

farther.

Document loaded appears on the control-panel

display.

CAUTION: To prevent damage to the product, do not use

an original that contains correction tape, correction fluid,

paper clips, or staples. Also, do not load photographs,

small originals, or fragile originals into the ADF. Use the

flatbed glass to scan these items.

2 Adjust the media guides until they are snug against

the media.

3 Use the alphanumeric buttons on the control panel to

dial the number.

-Or-

If the fax number you are calling has been assigned to

a one-touch key, press that key.

-Or-

If the fax number you are calling has a speed dial or

group-dial entry, press Phone Book, use the

alphanumeric buttons to specify the speed dial or

group-dial entry, and then press OK.

4 On the control panel, press Start Fax. The product

starts the fax job.