HP LaserJet M4345 MFP - Software Technical Reference (external)

Click Basic Installation to install only the HP PCL 6 driver and screen fonts. If you click Basic
Installation and then click Next, the Ready to Install dialog box opens (see
Figure 3-22 Ready to Install
dialog box).
If you select Custom Installation and then click Next, the Feature Selection dialog box opens, as
shown in the following figure.
NOTE Select Custom Installation to install the HP Send Fax driver, HP PCL 5 and
PS emulation drivers, as appropriate.
Figure 3-20 Feature Selection dialog box
An empty check box indicates that the feature is not installed. A check mark appears next to any driver
or document that is to be installed.
Information about the space required and the space available on the hard drive appears in the dialog
box.
Any combination of features can be selected for the installer. It is possible to create a custom installer
that installs features without including a print driver. Select the drivers and support documents to install.
To view details about the features, click Details…. The Details dialog box appears, as shown in the
following figure.
ENWW Print-driver installation instructions 77
MS Windows install