HP LaserJet M4345 MFP - Software Technical Reference (external)

Convert Gray Graphics to PostScript Gray
This control specifies whether to convert the true gray value (RGB) in graphics to the gray provided by
the driver. The following settings are available:
●
Yes
●
No (This is the default setting.)
Add Euro Currency Symbol to PostScript Fonts
This control specifies whether to add the euro symbol to the device fonts. The following settings are
available:
●
Yes (This is the default setting.)
●
No
Job Timeout
This control specifies how long the document can take to get from the computer to the device before
the device stops trying to print the document. If you specify 0 seconds, the device continues trying to
print indefinitely. The default setting is 0 seconds. Use the spin box to change this value, up to a
maximum of 32,767 seconds.
Wait Timeout
This control specifies how long the device waits to get more postscript information from the computer.
After the specified time passes, the device stops trying to print the document and prints an error
message. When printing a very complicated document, increase this value. If you specify 0 seconds,
the device waits indefinitely. The default setting is 300 seconds. Use the spin box to change this value,
up to a maximum of 32,767 seconds.
Minimum Font Size to Download as Outline
This control specifies the minimum font size (in pixels) for which the driver downloads TrueType fonts
as outline (Type 1) fonts. Any font smaller than the minimum setting is downloaded as a bitmap (Type
3) font. Use this option to fine-tune the Automatic setting for the TrueType Font Download option on
the Advanced tab in Document Defaults. The default setting is 100 pixel(s). Use the spin box to
change this value, up to a maximum of 32,767 pixels.
Maximum Font Size to Download as Outline
This control specifies the maximum font size (in pixels) for which the driver will download TrueType fonts
as bitmap (Type 3) fonts. Any font larger than the maximum setting will be downloaded as an outline
(Type 1) font. Use this option to fine-tune the Automatic setting or override the Send TrueType as
Bitmap setting for the TrueType Font Download option on the Advanced tab in Document
Defaults. The default setting is 600 pixel(s). Use the spin box to change this value, up to a maximum
of 32,767 pixels.
Installable Options
Topics:
●
Automatic Configuration
●
Tray 4 and Tray 5
ENWW Device Settings tab features 187
HP drivers for Windows