HP LaserJet M4345 MFP - Software Technical Reference (external)

NOTE The Back Cover options are not available when the Booklet Printing Layout setting
is enabled on the Finishing tab. The back cover setting is unavailable, because this page would
be printed in the middle of a booklet.
The Source is: setting specifies the source tray to use for adding a back cover to the document. The
list of source trays depends on the device accessories that are installed. Any optional trays that are
installed through the Device Settings tab also appear here.
The Type is: drop-down menu shows all of the media types that the device supports.
NOTE Use the same size of media for the entire print job. All Use Different Paper/Covers
options use the last Size is: setting selected in any one of the Use Different Paper/Covers
options.
When you change the type and source of the media and covers, the settings remain configured
until you close the software program.
Document preview image
The document preview image is a line-drawn image of a page that represents graphics and text. The
document preview image is always oriented so that the contents of the page are right-side-up.
Move the cursor over the document preview image to change the cursor from an arrow to a gloved hand.
Toggle between portrait and landscape page orientation by clicking the image.
Figure 5-11 Document preview image
Print Quality
The Print Quality group box is shown in the following figure.
ENWW Paper/Quality tab features 151
HP drivers for Windows