HP LaserJet M4345 MFP - Software Technical Reference (external)

NOTE Use the same size of media for the entire print job. All Use Different Paper/Covers
options use the last Size is: setting selected in any one of the Use Different Paper/Covers
options.
When you change the type and source of the media and covers, the settings remain configured
until you close the software program.
Back Cover
Use the Back Cover options to include a blank or preprinted back cover on a document, or to include
a back cover from a source tray that is different from the one used for the remainder of the document.
The following figure shows the Back Cover setting and options.
Figure 5-10 Back Cover options
The following are the Back Cover options:
●
Size is: drop-down menu
●
Add a Blank or Preprinted Cover check box (not selected by default)
●
Source is: drop-down menu
●
Type is: drop-down menu
The Size is: setting specifies the media size to use for the entire print job. Changes made to the Size
is: setting here override any previous Size is: settings in other Use Different Paper/Covers options.
When you select Back Cover, also select the Add a Blank or Preprinted Cover check box to enable
the setting. The Source is: and Type is: drop-down menus become available and a check mark appears
next to the Back Cover option.
150 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW
HP drivers for Windows