HP LaserJet M4345 MFP - Software Technical Reference (external)

●
Manual Feed in Tray 1
●
Tray 1
●
Tray 2
●
Tray 3
●
Tray 4
●
Tray 5
The default setting is Automatically Select. When this setting is selected, the HP LaserJet M4345 MFP
uses the source tray that supports the selected media size. If you select a source tray other than
Automatically select, make sure that the correct media size is loaded in the source tray. For information
about media sources, see
Media attributes.
Type is:
The Type is: drop-down menu shows all of the media types that the HP LaserJet M4345 MFP supports.
When you use the default setting, Unspecified, the device uses the default media type, which is
usually Plain.
No mechanism exists for manually adding custom media types through the driver. Custom types can
be added only by using the bidirectional communication mechanism, so they must already exist in the
device when the bidirectional query occurs. If bidirectional communication is enabled, then the
information an updated list of media types is returned. If bidirectional communication is not enabled,
then the driver looks for custom media types that have been saved from a previous bidirectional
communication query, and uses those. Otherwise, no custom media types are available through the
driver.
The following standard types appear in the list:
●
Unspecified
●
Plain
●
Preprinted
●
Letterhead
●
Transparency
●
Prepunched
●
Labels
●
Bond
●
Recycled
●
Color
●
Light < 75 g/m2 (20 lb)
●
Cardstock > 163 g/m2 (45 lb)
●
Rough
●
Envelope
144 Chapter 5 HP PCL 6, PCL 5, and PS Emulation drivers for MS Windows ENWW
HP drivers for Windows