HP LaserJet M4345 MFP - Software Technical Reference (external)

●
Send TrueType as Bitmap. (available only in the HP PCL 6 and PCL 5 drivers)
Send True Type as Bitmap provides an alternative for software programs that have trouble using
TrueType fonts for special graphic aspects such as shading, rotation, or slanting. The setting is
Disabled (off) by default. The TrueType fonts are converted to bitmap soft fonts before
downloading. When Enabled, the driver sends TrueType fonts to the printer as outlines, which
retains the standard format (outline) of the fonts.
●
Graphics Mode. (available only in the HP PCL 5 driver)
Use the Graphics Mode feature to select one of the following settings:
●
Send Graphics as Vector. Select this setting to send graphics to the device as a combination
of HP Graphics Language, version 2 (HP-GL/2), and raster images. This setting might produce
higher-quality output. It is the default setting.
●
Send Graphics as Raster. Select this setting to send all graphics to the device as images
composed of individual dots. This setting might improve printing speed in some cases.
Layout Options
The Layout Options setting contains the Page Order setting.
Page Order specifies the order in which the pages of the document are printed. Front to Back prints
the document so that page 1 prints first. Back to Front prints the document so that page 1 prints last.
NOTE The page-ordering operation works on whole sheets of media rather than on individual
logical pages. Accordingly, if Pages per Sheet (on the Finishing tab) is greater than one, the
ordering of logical pages on a physical sheet of media does not change.
ENWW Advanced tab features 135
HP drivers for Windows