HP LaserJet M4345 MFP - Software Technical Reference (external)

The following selections are available in the Print Task Quick Sets drop-down menu:
●
Default Print Settings
Default Print Settings
When you select Default Print Settings, nearly all of the settings are restored to the combination that
existed after the driver was installed (the original settings). However, if the attribute combinations that
are associated with the other quick sets have been changed or deleted, the original settings for those
items are not restored.
Type a new Quick Set name here appears in the Print Task Quick Sets menu automatically if no
other driver settings have been changed since the driver was installed, or if all of the driver settings
match the original settings. Otherwise, the setting in the Print Task Quick Sets menu is the same label
that appeared when you last closed the printing Properties dialog by clicking OK.
When you select Default Print Settings, the following defaults are restored:
●
Paper Options — Size is: Letter
●
Orientation — Portrait
By default, the Print Task Quick Sets menu is set to Default Print Settings. When you change any of
the default settings and you want to save the configuration as a Print Task Quick Set, highlight the
words Default Print Settings, type the name you want for your new Print Task Quick Set, and then
click Save. Print Task Quick Sets are saved in the system registry. To delete a Print Task Quick Set,
select it from the drop-down menu and click Delete.
NOTE You can store a maximum of 25 Print Task Quick Sets on a particular system. If you
attempt to save more, a message appears that states: There are too many Print Task Quick
Sets defined. Please delete some before adding new ones.
Paper Options
The settings specified in the Paper Options group on the Paper/Quality tab apply to all of the pages
of the document.
The following settings are available in the Paper Options group box:
●
Size is:
Size is:
The Size is: setting is a drop-down menu that lists all of the support media sizes.
When you move the cursor over the dimensions label, the cursor changes from an arrow to a gloved
hand. Click the dimensions label to toggle between English and metric units.
Because media-size settings in most software programs override driver settings, it is generally best to
use the driver to set media size only when you are printing from software programs that do not include
a media-size setting, such as NotePad.
The media size will be applied to the Send Fax job; no printing will occur.
For information about media sizes, see the
Media attributes section of this STR.
122 Chapter 4 HP Send Fax driver ENWW
HP Send Fax driver