HP LaserJet M4345 MFP - Software Technical Reference (external)

For each of the options in the Specify TCP/IP Port dialog box, either use the default port name (as
specified in each of the three options) or specify a different name.
To use the default port name, select Use Default and click Next. To specify a different name, click
Specify, type a port name of your choice, and click Next. The Port Creation Options dialog box
appears.
Figure 3-38 Port Creation Options dialog box
Click No, do no create the port (the printer will not be installed) if you do not want to create a port.
If you click Yes, create the port, type the device hardware address in the Hardware Address field and
then click Next to open the Drivers dialog box.
If you click Next without typing a hardware address, a network setup error message appears, as shown
in the following figure.
Figure 3-39 Please enter a Hardware address: Network Setup Error dialog box
NOTE To print a configuration page to see the hardware address, see Print the configuration
page .
92 Chapter 3 Install MS Windows printing-system components ENWW
MS Windows install