HP LaserJet 4345 MFP - Job Aid - PCL 6 Print

HP LaserJet M4345 MFP – Print
2
©copyright Hewlett-Packard Company 2007
How do I: Steps to perform
8. Select a paper size.
Click on the Paper/Quality tab, click the
Size is dropdown menu, then select a
paper size. Click Custom if the paper size
you want is not in the menu.
9. Print different first and last
pages.
Click Use Different Paper/Covers, then
select a size, type, or source for the first,
last, and other pages.
10. Select a paper source.
Click the Source is dropdown menu, then
select a paper tray. Use Manual Feed for
printing special media such as
transparencies, labels, or envelopes.
11. Select a paper type (the
media type should be in a
paper tray and set using the
printer control panel).
Click the Type is dropdown menu, then
select a paper type.
12. Save toner.
Click EconoMode when printing drafts to
save toner.
How do I: Steps to perform
13. Save a Quick Set (the
printer driver must be stored
on your PC for this to work).
Adjust settings on any or all tabs. To add a
Quick Set, type a name in the Quick Sets
field and click Save. To delete a Quick Set,
display it in the Quick Sets field and click
Delete.
14. Select a stapling option.
Click on the Output tab, then select an
option from the Staple dropdown menu. A
stapler/stacker unit must be installed.
15. Select a print destination.
Select a destination from the Bin dropdown
menu
16. Get help for any printing
option.
While in any tab, click the question mark
in the upper-right side of the top border,
then click on a print control. A pop-up
message displays help for that control.
Click again to remove the pop-up message.
Click Help for
on-line help.
13
14
15
16
8
9
10
11
12