HP StorageWorks Fabric OS 6.1.x administrator guide (5697-0234, November 2009)

372 Administering ISL Trunking
20 20 -- N8 No_Module
21 21 -- N8 No_Module
22 22 -- N8 No_Module
23 23 -- N8 No_Module
24 24 -- N8 No_Module
25 25 -- N8 No_Module
26 26 -- N8 No_Module
27 27 -- N8 No_Module
28 28 -- N8 No_Module
29 29 -- N8 No_Module
30 30 -- N8 No_Module
31 31 -- N8 No_Module
32 32 id N4 No_Light
33 33 id N4 No_Light
34 34 id N4 No_Light
35 35 id N4 No_Light
36 36 id N4 Online F-Port 2 NPIV public (Trunk master)
37 37 id N4 Online F-Port (Trunk port, master is Port 36 )
38 38 id N4 Online F-Port (Trunk port, master is Port 36 )
39 39 id N4 Online F-Port (Trunk port, master is Port 36
)
5. Display TA enabled port configuration:
switch:admin> porttrunkarea --show enabled
Port Type State Master TA DA
-------------------------------------
36 F-port Master 36 37 36
37 F-port Slave 36 37 37
38 F-port Slave 36 37 38
39 F-port Slave 36 37 39
6. Display the trunking information:
For example to display trunk details for a user assigned TA 37 that includes ports 36-39:
switch:admin> porttrunkarea --show trunk
Trunk Area 37: 36->23 sp: 4.000G bw: 16.000G deskew 16 MASTER
39->22 sp: 4.000G bw: 4.000G deskew 15
38->21 sp: 4.000G bw: 4.000G deskew 16
37->20 sp: 4.000G bw: 4.000G deskew 16
Enabling the DCC policy on trunk
1. After you assign a Trunk Area, the portTrunkArea CLI checks whether there are any active DCC
policies on the port with the index TA, and then issues a warning to add all the device WWNs to the
existing DCC policy with index as TA.
All DCC policies that refer to an Index that no longer exist will not be in effect.
2. Add the WWN of all the devices to the DCC policy against the TA.
3. Issue the secPolicyActivate command to activate the DCC policy.
You must enable the TA before issuing the secPolicyActivate command in order for security to
enforce the DCC policy on the trunk ports.
4. Turn on the trunk ports.
Trunk ports should be turned on after issuing the secPolicyActivate command to prevent the ports
from becoming disabled in the case where there is a DCC security policy violation.