HP StorageWorks Fabric OS 6.1.x administrator guide (5697-0234, November 2009)

226 Configuring Directors
Basic blade management
The following sections provide procedures for naming a switch, powering a port blade off and on and
disabling and enabling a port blade.
Changing a Director’s name
HP recommends that you customize the enterprise-class platform name for each platform. Some system logs
identify devices by platform names, if you assign meaningful platform names, logs are more useful.
To change the platform name:
1. Connect to the switch and log in using an account assigned to the admin role.
2. Enter the chassisName command using the following syntax:
switch:admin> chassisname "newname"
where newname is the new name for the enterprise-class platform.
Enterprise-class platform names can be from 1 to 15 characters long, must begin with a letter, and can
contain letters, numbers, or the underscore character. It is not necessary to use the quotation marks.
3. Record the new platform name for future reference.
23 13 5 / 13 5 151 / 151 167 / 167 18 3 / 18 3 19 9 / 19 9 215 / 215 2 31 / 231 247 / 247
2 2 13 4 / 13 4 15 0 / 15 0 16 6 / 16 6 18 2 / 18 2 19 8 / 19 8 214 / 214 23 0 / 23 0 24 6 / 24 6
21 13 3 / 13 3 14 9 / 14 9 16 5 / 16 5 181 / 181 197 / 197 213 / 213 2 29 / 2 29 2 45 / 24 5
20 132/132 148/148 164/164 180/180 196/196 212/212 228/228 244/244
19 131 / 131 147 / 147 16 3 / 163 17 9 / 17 9 19 5 / 19 5 211/211 227/227 243/243
18 130/130 146/146 162/162 178/178 194/194 210/210 226/226 242/242
17 129/129 145/145 161/161 177/177 193/193 209/209 225/225 241/241
16 128/128 144/144 160/160 176/176 192/192 208/208 224/224 240/240
15 15/15 31/31 47/47 63/63 79/79 95/95 111/111 127 / 127
14 14/14 30/30 46/46 62/62 78/78 94/94 110/110 126 / 126
13 13/13 29/29 45/45 61/61 77/77 93/93 109/109 125/125
12 12/12 28/28 44/44 60/60 76/76 92/92 108/108 124/124
11 11/11 27/27 43/43 59/59 75/75 91/91 107/107 123/123
10 10/10 26/26 42/42 58/58 74/74 90/90 106/106 122/122
9 9/9 25/25 41/41 57/57 73/73 89/89 105/105 121/121
8 8/8 24/24 40/40 56/56 72/72 88/88 104/104 120/120
7 7/7 23/23 39/39 55/55 71/71 87/87 103/103 119/119
6 6/6 22/22 38/38 54/54 70/70 86/86 102/102 118/118
5 5/5 21/21 37/37 53/53 69/69 85/85 101/101 117/117
4 4/4 20/20 36/36 52/52 68/68 84/84 100/100 116/116
3 3/3 19/19 35/35 51/51 67/67 83/83 99/99 115/115
2 2/2 18/18 34/34 50/50 66/66 82/82 98/98 114/114
1 1/1 17/17 33/33 49/49 65/65 81/81 97/97 113/113
0 0/0 16/16 32/32 48/48 64/64 80/80 96/96 112/112
Table 63 Default index/area_ID core PID assignment with no port swap (continued)
Port on
blade
Slot
1Idx/area
Slot
2Idx/area
Slot
3Idx/area
Slot
4Idx/area
Slot
7Idx/area
Slot
8Idx/area
Slot
9Idx/area
Slot
10Idx/area