HP B-series Fabric OS 7.1.1a Release Notes (5697-3023, November 2013 - includes all 7.1.1x versions)

Table 12 Fabric OS 7.1.1 closed defects (continued)
SolutionClosed defect summary
Fixed in Fabric OS 7.1.1.
Workaround prior to upgrade: Disable FCIP Open Systems
Tape Pipelining.
The HP Multiprotocol Extension Blade DP panics with FCIP
tape pipelining enabled.
Fixed in Fabric OS 7.1.1.
Fixed in Fabric OS 7.1.1.IPv6 links are not presented in Fabric Tree when connecting
to switch via IPv6.
Fixed in Fabric OS 7.1.1.Error log content is getting cleared of prior messages when
migrating to Fabric OS 7.1.0.
Fixed in Fabric OS 7.1.1.Webtool Search function errors.
Workaround prior to upgrade: Disable FCIP FICON Tape
Pipelining or XRC emulation.
A negative value is displayed for the number of host side
paths in command display.
Fixed in Fabric OS 7.1.1.
Fixed in Fabric OS 7.1.1.The thconfig command does not properly monitor a port
that has SFP swapped from 8Gb to 16Gb.
Fixed in Fabric OS 7.1.1.The thconfig -sfptype configuration gets applied
without running the --apply option.
Workaround prior to upgrade: Do not use pre Fabric OS
7.0 switches as a SAN Network Advisor seed switch.
Incompatible FDMI attribute between different Fabric OS
releases caused a kernel panic.
Fixed in Fabric OS 7.1.1.
Workaround prior to upgrade: Disable and re-enable the
invalid port.
On trunk master EX_Port disable, parameters are
erroneously copied from the old master port to the neighbor
pwwn.
Fixed in Fabric OS 7.1.1.
Workaround prior to upgrade: Disable Open Systems Tape
Pipelining or limit tunnel vtn to 1.
Third party device failing writes to tape drives when
appending.
Fixed in Fabric OS 7.1.1.
Workaround prior to upgrade: Bounce any of the host ports
and all targets discovered by the host.
During LSAN activation, some event sequences can cause
GE_PT query to fail.
Fixed in Fabric OS 7.1.1.
Workaround prior to upgrade: Execute sfpshow –f.Sfpshow CLI command does not provide data.
Fixed in Fabric OS 7.1.1.
Fixed in Fabric OS 7.1.1.Kernel panic occurs while attempting to correct ASIC
memory parity error.
Fixed in Fabric OS 7.1.1.There are excessive internal I2C reset raslog messages.
Fixed in Fabric OS 7.1.1.SNMP configuration replication overwrites AAA LDAP
settings.
Fixed in Fabric OS 7.1.1.XTUN-1007 errors are logged during system verification
tests on an HP DC SAN Backbone Director/HP SN8000B
8-Slot SAN Backbone Director with an HP Multiprotocol
Extension Blade installed.
Fixed in Fabric OS 7.1.1.A kernel panic occurs while running the portcfgspeed
command on an internal port of a Brocade 5470
embedded switch.
Fabric OS 7.1.1 fixes 61