HP B-series Fabric OS 7.1.0_blv Release Notes (5697-2827, September 2013)

Table 2 Fabric OS 7.1.0 closed defects (continued)
SolutionClosed defect summary
Fixed in Fabric OS 7.1.0.After running sshutil delpubkeys, the admin account
is locked out. Users must login as root and delete the known
hosts file to correct the issue.
Fixed in Fabric OS 7.1.0.Unable to add more than one FCIP circuit, even when an
AE license is installed after configdefault.
Fixed in Fabric OS 7.1.0.Switches running Fabric OS 7.x may experience I/O
disruption. In a multiple trunk group scenario to the same
domain, a trunked link may be abandoned when the
bandwidth is not the same as the other trunked link causing
the I/O disruption.
Fixed in Fabric OS 7.1.0.The SKM log periodically displays the error message
"Unknown key name or insufficient permissions”.
Fixed in Fabric OS 7.1.0.A CP panic and unintended HA Failover may occur when
reseating core blades.
Fixed in Fabric OS 7.1.0.The perfhelp command output does not include
information on the fmconfig command.
Fixed in Fabric OS 7.1.0.In Fabric OS 7.0.0b and earlier (that use OpenSSL
0.9.8d), vulnerability scanning tools may report the
presence of CVE-2009-3245.
Workaround prior to upgrade:Shared memory segments are used up by the Name Server
and users are unable to manage switch.
Avoid running the nsaliasshow command.
Fixed in Fabric OS 7.1.0.
Workaround prior to upgrade:AG may sometimes not show up in agshow and F-ports
are unable to login.
Execute a reboot switch, not an HA Reboot.
Fixed in Fabric OS 7.1.0.
Fixed in Fabric OS 7.1.0.CRC with good EOF detected on ICL ports between and
HP DC SAN Backbond Director and an HP DC04 SAN
Director.
Fixed in Fabric OS 7.1.0.There are missing blocks on tapes when tape pipelining is
enabled.
Fixed in Fabric OS 7.1.0.There is an FCIP tunnel performance drop when running
Fabric OS 7.x.
Fixed in Fabric OS 7.1.0.There is a POST failure with misleading test name on 16
Gb/s blades.
Fixed in Fabric OS 7.1.0.FICON Selective resets occur during sort tape job with
large channel programs when running through FICON to
ESCON converter and FCIP FICON Tape Pipelining.
Fixed in Fabric OS 7.1.0.Entering incorrect WWPNs or WWNNs for creating CTCs
will cause a panic on an HP Encryption SAN switch.
Fixed in Fabric OS 7.1.0.A switch may report duplicate WWN and panic.
Fixed in Fabric OS 7.1.0.The diagshow output for the HP 2408 FCoE Converged
Network Switch incorrectly displays 10 Gb/s ports.
Fixed in Fabric OS 7.1.0.A switch panic may occur upon detection of SRAM parity
errors on the HP 400 Multi-protocol Router and the HP
B-Series Multi-protocol Router Blade.
Fixed in Fabric OS 7.1.0.C2-1006 and C2-1010 error messages are displayed
reporting internal link errors without any hardware fault.
26