Fabric OS Message Reference v6.4.0 (53-1001767-01, June 2010)

Fabric OS Message Reference 325
53-1001767-01
FW-1303
42
FW-1303
Message <timestamp>, [FW-1303], <sequence-number>,, INFO, <system-name>, <Label>, is
between high and low boundaries(High=<High value>, Low=<Low value>). Current value
is <Value> <Unit>.
Probable Cause Indicates that the number of hypertext transfer protocol (HTTP) violations has changed from a value
outside of the acceptable range to a value within the acceptable range. HTTP violations indicate
that a browser connection request has been received from an unauthorized IP address. The
HTTP_POLICY contains a list of internet protocol (IP) addresses that are authorized to establish
browser connections to the switches in the fabric.
Recommended
Action
No action is required.
Severity INFO
FW-1308
Message <timestamp>, [FW-1308], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of simple network management protocol read (RSNMP) violations has
changed. RSNMP violations indicate that an SNMP “get” operation request has been received from
an unauthorized IP address.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity INFO
FW-1332
Message <timestamp>, [FW-1332], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of switch connection control policy (SCC) violations has changed. SCC
violations indicate that an unauthorized switch tried to join the fabric. The SCC_POLICY contains a
list of switches by world wide name (WWN) that are allowed to be members of a fabric.
Recommended
Action
Run the errShow command to determine the WWN of the device that sent the request. Responses
to security-class messages depend on user policies. Consult your security administrator for
response strategies and policies.
Severity INFO