Brocade Fabric OS v7.2.0d Release Notes v1.0

Closed with Code Change in Fabric OS v7.2.0b
Fabric OS v7.2.0d Release Notes v1.0 Page 41 of 52
Defect ID:
DEFECT000472858
Technical Severity:
High
Summary:
A learning flow defined with both generator and monitor as feature options and srcdev "*" specified,
monitors only a portion of real flows on the egress port
Symptom:
A learning flow, defined on an egress port with both generator and monitor features specified and also
has either srcdev or dstdev option as '*' will monitor less number of flows than actual number of flows
going through the egress port. This will only happen when the number of real flows exceeds 32.
Probability:
High
Feature:
Network Patroller
Function:
Flow monitor
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000472886
Technical Severity:
High
Summary:
FCIP FICON Tape Emulation not going into read pipelining due to synchronizing status bit set in 1st
command in chain
Symptom:
Slow FICON tape read performance due to long running restore/recall jobs
Probability:
Medium
Feature:
FOS Software
Function:
FCIP
Reported In Release:
FOS7.0.0
Service Request ID:
1219501
Defect ID:
DEFECT000473053
Technical Severity:
High
Summary:
Configupload after Configdefault retains old simport configuration in uploaded config
Symptom:
Configupload after Configdefault retains old simport configuration in uploaded config. The flow
definitions existing in the system before configdefault, will reappear if the uploaded file is down
loaded onto a switch.
Probability:
High
Feature:
Network Patroller
Function:
Other
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000473063
Technical Severity:
High
Summary:
SIM ports stuck as G-port when changing a logical switch to a base switch
Symptom:
Ports that are configured as SIM ports in a logical switch are get stuck in an invalid state when the
logical switch is reconfigured as Base switch
Workaround:
Remove configured SIM ports before converting logical switch to base switch
Probability:
High
Feature:
Network Patroller
Function:
ASIC interfaces
Reported In Release:
FOS7.2.0
Defect ID:
DEFECT000473548
Technical Severity:
High
Summary:
When flows are monitored in MAPS, switch disable/enable or port enable/disable could trigger
unexpected MAPS RASLOGs
Symptom:
Unexpected MAPS RASLOGs with large values are triggered for the flows affected by port
enable/disable or switch enable/disable operations.
Probability:
High
Feature:
Advanced Monitoring Services
Function:
Flows
Reported In Release:
FOS7.2.0