Brocade Fabric OS MIB Reference Guide v6.2.0 (53-1001156-01, April 2009)

Fabric OS MIB Reference 539

53-1001156-01

swAdmStatus 1.3.6.1.4.1.1588.2.1.1.1.1.8

The desired administrative status of the switch. A management station might place the switch in a

desired state by setting this object accordingly.

Values Possible values are:

• online (1) Set the switch to be accessible by an external FC port.

• offline (2) Set the switch to be inaccessible.

• testing (3) Set the switch to run the built-in test.

• faulty (4) Set the switch to a “soft” faulty condition.

• reboot (5) Set the chassis to reboot in 1 second.

• fastboot (6) Set the chassis to fastboot in 1 second. Fastboot causes the chassis to boot but

omit the POST.

When the switch is in faulty state, only two states can be set: faulty and reboot/fastboot

For the Brocade 3250, 3850, 3900, 24000, 48000, DCX, and DCX-4S director the testing (3) and

faulty (4) values are not applicable.

The Possibles values for Brocade 300, 5100 and 5300 are either online(1) and offline(2).