Brocade Fabric OS MIB Reference Guide v6.2.0 (53-1001156-01, April 2009)

xvi Fabric OS MIB Reference
53-1001156-01
• Description of any troubleshooting steps already performed and the results
• Serial console and Telnet session logs
• Syslog message logs
2. Switch Serial Number
The switch serial number and corresponding bar code are provided on the serial number label,
as shown here:
The serial number label is located as follows:
• Brocade 200E—On the nonport side of the chassis
• Brocade 300, 4100, 4900, 5100, 5300, and 7500—On the switch ID pull-out tab located
inside the chassis on the port side on the left
• Brocade 5000—On the switch ID pull-out tab located on the bottom of the port side of the
switch
• Brocade 7600—On the bottom of the chassis
• Brocade 48000, Brocade DCX, Brocade DCX-4S—Inside the chassis next to the power
supply bays.
3. World Wide Name (WWN)
• Use the wwn command to display the switch WWN. If you cannot use the wwn command
because the switch is inoperable, you can get the WWN from the same place as the serial
number.
Document feedback
Because quality is our first concern at Brocade, we have made every effort to ensure the accuracy
and completeness of this document. However, if you find an error or an omission, or you think that
a topic needs further development, we want to hear from you. Forward your feedback to:
[e-mail]
Provide the title and version number and as much detail as possible about your comment,
including the topic heading and page number and your suggestions for improvement.
*FT00X0054E9*
FT00X0054E9