Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

578 Fabric OS Message Reference
53-1001157-01
SEC-3048
98
SEC-3048
Message AUDIT, <timestamp>, [SEC-3048], INFO, SECURITY, <event-initiator-details>,
<event-location>, FIPS mode has been enabled in the system using force option.
Probable Cause Indicates the system has been forced to FIPS mode.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3049
Message AUDIT, <timestamp>, [SEC-3049], INFO, SECURITY, <event-initiator-details>,
<event-location>, Status of bootprom access is changed using fipscfg CLI to :
<Access Status>.
Probable Cause Indicates the status of bootprom access is changed using the fipscfg command.
Recommended
Action
No action is required.
Severity INFO
SEC-3050
Message AUDIT, <timestamp>, [SEC-3050], INFO, SECURITY, Event: <Event Name>, Status:
success, Info: <Event Specific Info>.
Probable Cause Indicates the specified sshutil operation was performed..
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3051
Message AUDIT, <timestamp>, [SEC-3051], INFO, SECURITY, <event-initiator-details>,
<event-location>, , The license key <key> is <Action>.
Probable Cause Indicates that a license key is added or removed.
Recommended
Action
No action is required.
Severity INFO