Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 569
53-1001157-01
SEC-3014
98
Recommended
Action
Verify the security version stamp was intentionally reset. If the security event was planned, no
action is required. If the security version stamp was not intentionally reset, take appropriate action
as defined by your enterprise security policy.
Severity INFO
SEC-3014
Message AUDIT, <timestamp>, [SEC-3014], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Event option>
RADIUS server <Server Name> for AAA services.
Probable Cause Indicates a user has changed the remote authentication dial-in user service (RADIUS)
configuration.
Recommended
Action
Verify the RADIUS configuration was changed intentionally. If the RADIUS configuration was
intentionally changed, no action is required. If the security event was not planned, take appropriate
action as defined by your enterprise security policy.
Severity INFO
SEC-3015
Message AUDIT, <timestamp>, [SEC-3015], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Moved RADIUS
server <Server name> to position <New position>.
Probable Cause Indicates a user has changed the position of the remote authentication dial-in user service
(RADIUS) server.
Recommended
Action
Verify the RADIUS server position was intentionally changed. If the RADIUS server position was
intentionally changed, no action is required. If the RADIUS server position was not intentionally
changed, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-3016
Message AUDIT, <timestamp>, [SEC-3016], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Attribute
[<Attribute Name>] of RADIUS server <server ID> changed <Attribute related info,
if any>.
Probable Cause Indicates a user has changed the specified attribute of the remote authentication dial-in user
service (RADIUS) server.
Recommended
Action
Verify the RADIUS attribute was intentionally changed. If the RADIUS attribute was intentionally
changed, no action is required. If the RADIUS attribute was not intentionally changed, take
appropriate action as defined by your enterprise security policy.