Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 565
53-1001157-01
Chapter
98
AUDIT SEC System Messages
SEC-3001
Message AUDIT, <timestamp>, [SEC-3001], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Security mode
<State change: Enabled or Disabled> on the fabric.
Probable Cause Indicates the security mode of the fabric was either enabled or disabled.
Recommended
Action
Verify the security mode change was planned. If the security mode change was planned, no action
is required. If the security mode change was not planned, take appropriate action as defined by
your enterprise security policy.
Severity INFO
SEC-3002
Message AUDIT, <timestamp>, [SEC-3002], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: <Event Related
Info>.
Probable Cause Indicates the specified security event has occurred. The Event Name can be one of the following:
• There has been an fabric configurations server (FCS) failover.
• A security policy has been activated.
• A security policy has been saved.
• A security policy has been aborted.
• A non-FCS password has changed.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-3003
Message AUDIT, <timestamp>, [SEC-3003], INFO, SECURITY, <event-initiator-details>,
<event-location>, , Event: <Event Name>, Status: success, Info: Created <Policy
Name> policy, with members <Member List> .
Probable Cause Indicates a new security policy was created with entries.
Note: If you use a wildcard (for example, an asterisk) in creating a policy, the audit report displays
the wildcard in the event info field.