Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

460 Fabric OS Message Reference
53-1001157-01
SEC-1322
75
Severity ERROR
SEC-1322
Message <timestamp>, [SEC-1322], <sequence-number>,, WARNING, <system-name>, Some DCC
policy is too large, distribution cancelled
Probable Cause Indicates this fabric is not able to support a device connection control (DCC) policy with more than
256 ports.
Recommended
Action
Reconfigure any policy that includes more than 256 ports in its member list, then save the policy
configuration changes.
Severity WARNING
SEC-1323
Message <timestamp>, [SEC-1323], <sequence-number>,, INFO, <system-name>, Keys \"<Key
Name>\" ignored during configdownload.
Probable Cause Indicates the specified key is ignored during configDownload.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1324
Message <timestamp>, [SEC-1324], <sequence-number>,, INFO, <system-name>, Fabric
transaction failure. RCS error:
<Error code>
Probable Cause Indicates the reliable commit service (RCS) transaction failed with the specified reason code.
Recommended
Action
Verify the event was planned. If the event was planned, no action is required. If the event was not
planned, take appropriate action as defined by your enterprise security policy.
Severity INFO
SEC-1325
Message <timestamp>, [SEC-1325], <sequence-number>,, ERROR, <system-name>, Security
enforcement: Switch <switch WWN> connecting to port <Port number> is not
authorized to stay in fabric.
Probable Cause Indicates that because of a switch connection control (SCC) policy violation, the switch is being
disabled on the specified port.