Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 447
53-1001157-01
SEC-1184
75
Recommended
Action
Retry the command with a valid value.
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the
supportSave command and contact your switch service provider.
Severity ERROR
SEC-1184
Message <timestamp>, [SEC-1184], <sequence-number>,, INFO, <system-name>, <server>
configuration change, action <action>, server ID <server>.
Probable Cause Indicates the specified action is applied to the specified Remote Authentication Dial-in User Service
(RADIUS) / Lightweight Directory Access Protocol (LDAP) server configuration. The possible actions
are ADD, REMOVE, CHANGE, and MOVE
Recommended
Action
No action is required.
Severity INFO
SEC-1185
Message <timestamp>, [SEC-1185], <sequence-number>,, INFO, <system-name>, <action>
switch DB.
Probable Cause Indicates the switch database was enabled or disabled as the secondary authentication,
accounting, and authorization (AAA) mechanism when the Remote Authentication Dial-in User
Service (RADIUS) / Lightweight Directory Access Protocol (LDAP) is the primary AAA mechanism
Recommended
Action
No action is required.
Severity INFO
SEC-1186
Message <timestamp>, [SEC-1186], <sequence-number>,, INFO, <system-name>, <action>
<action> Configuration.
Probable Cause Indicates the remote authentication dial-in user service (RADIUS/LDAP) configuration was enabled
or disabled as the primary authentication, accounting, and authorization (AAA) mechanism.
Recommended
Action
No action is required.
Severity INFO