Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 445
53-1001157-01
SEC-1173
75
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1173
Message <timestamp>, [SEC-1173], <sequence-number>,, ERROR, <system-name>, Lost contact
with Primary FCS switch.
Probable Cause Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the
secure fabric. This could be due to the primary FCS being disabled.
Recommended
Action
If the primary FCS was disabled intentionally, no action is required; if not, check the primary FCS.
Severity ERROR
SEC-1174
Message <timestamp>, [SEC-1174], <sequence-number>,, ERROR, <system-name>, Failed to set
<FCS or non-FCS> password.
Probable Cause Indicates the FCS or non-FCS password could not be set.
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1175
Message <timestamp>, [SEC-1175], <sequence-number>,, ERROR, <system-name>, Failed to
install zone data.
Probable Cause Indicates the zone database could not be installed on the switch.
Recommended
Action
Verify all switches in the fabric are in time synchronization with the primary and that no external
entity is trying to access the fabric. When verification is complete, retry the operation.
Severity ERROR
SEC-1176
Message <timestamp>, [SEC-1176], <sequence-number>,, ERROR, <system-name>, Failed to
generate new version stamp.
Probable Cause Indicates the primary fabric configuration server (FCS) failed to generate a new version stamp due
to the fabric not being stable.