Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 437
53-1001157-01
SEC-1126
75
Severity INFO
SEC-1126
Message <timestamp>, [SEC-1126], <sequence-number>,, INFO, <system-name>, Secure mode has
been disabled.
Probable Cause Indicates that a secure mode disable operation completed successfully.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1130
Message <timestamp>, [SEC-1130], <sequence-number>,, INFO, <system-name>, The Primary FCS
has failed over to a new switch.
Probable Cause Indicates an FCS failover operation was completed successfully.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1135
Message <timestamp>, [SEC-1135], <sequence-number>,, INFO, <system-name>, Secure fabric
version stamp has been reset.
Probable Cause Indicates the version stamp of the secure fabric is reset.
Recommended
Action
Verify the security event was planned. If the security event was planned, no action is required. If the
security event was not planned, take appropriate action as defined by your enterprise security
policy.
Severity INFO
SEC-1136
Message <timestamp>, [SEC-1136], <sequence-number>,, ERROR, <system-name>, Failed to
verify signature <data type, MUA, policy, etc.,>.