Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

348 Fabric OS Message Reference
53-1001157-01
LFM-1004
52
LFM-1004
Message <timestamp>, [LFM-1004], <sequence-number>,, CRITICAL, <system-name>, HA is out
of sync for opcode <HA OPCODE>, error value <error value>.
Probable Cause Indicates the trigger for some internal logging purpose.
Recommended
Action
Send the ffdc log to the support.
Severity CRITICAL
LFM-1005
Message <timestamp>, [LFM-1005], <sequence-number>,, WARNING, <system-name>, Logical port
<portnum> disabled with reason <portnum>(<reason>).
Probable Cause Indicates a LISL was disabled due to protocol conflict or security/policy violation. This can result in
possible traffic issues.
Recommended
Action
Check the reason for port disable using switchshow command, rectify the cause and re-enable the
LISL using the lfcfg --lislenable command.
Severity CRITICAL
LFM-1006
Message <timestamp>, [LFM-1006], <sequence-number>,, WARNING, <system-name>, The switch
with domain <domain> with firmware version <version> has joined the FID <FID>
fabric and may not be compatible with XISL use.
Probable Cause Indicates validation for firmware compatibility of the specified switch for XISL use failed.
Recommended
Action
Check release notes to verify if this firmware is compatible with XISL use. If it is not switch should
be removed from the fabric.
Severity WARNING