Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 343
53-1001157-01
Chapter
50
KSWD System Messages
KSWD-1001
Message <timestamp>, [KSWD-1001], <sequence-number>, FFDC, WARNING, <system-name>,
<Software component>:<Software component Process ID> failed to refresh (<Current
time>:<Refresh time>).
Probable Cause Indicates one of the critical daemons is found to be nonresponsive. An abort signal is sent.
Recommended
Action
Copy the warning message along with any core file information, and contact your switch service
provider.
Severity WARNING
KSWD-1002
Message <timestamp>, [KSWD-1002], <sequence-number>, FFDC, WARNING, <system-name>,
Detected termination of process <Software component>:<Software component Process
ID>.
Probable Cause Indicates a process on the switch has ended unexpectedly.
Recommended
Action
Copy the warning message along with any core file information, and contact your switch service
provider.
Severity WARNING
KSWD-1003
Message <timestamp>, [KSWD-1003], <sequence-number>, FFDC, WARNING, <system-name>, kSWD:
<Warning message>.
Probable Cause Indicates a warning state within the system.
A critical application error was reported in the watchdog subsystem. Refer to the string at the end
of the error message for specific information. The switch will reboot (on single-CP switches) or fail
over (on dual-CP switches).
The warning message will be one of the following:
• <Detected unexpected termination of: <daemon name>>
Probable Cause: One of the critical daemons ended unexpectedly.
• <<daemon name> failed to refresh SWD*** Sending SIGABRT to pid <process id number>>
Probable Cause: One of the critical daemons is found to be nonresponsive; sending signal
abort.