Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

290 Fabric OS Message Reference
53-1001157-01
FW-1430
35
FW-1430
Message <timestamp>, [FW-1430], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor <string>.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty temperature sensors is greater than or equal to the policy set by the switchStatusPolicySet
command. A temperature sensor is faulty when the sensor value is not in the acceptable range or
is faulty.
Recommended
Action
Replace the field-replaceable unit (FRU) with the faulty temperature sensor.
Severity WARNING
FW-1431
Message <timestamp>, [FW-1431], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor Fan:
<Number Bad> bad.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty fans is greater than or equal to the policy set by the switchStatusPolicySet command. A fan is
faulty when sensor value is not in the acceptable range or is faulty.
Recommended
Action
Replace the faulty or deteriorating fan field-replaceable units (FRUs).
Severity WARNING
FW-1432
Message <timestamp>, [FW-1432], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor WWN:
<Number Bad> bad.
Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of
faulty world wide name (WWN) cards is greater than or equal to the policy set by the
switchStatusPolicySet command.
Recommended
Action
Replace the faulty WWN card.
Severity WARNING
FW-1433
Message <timestamp>, [FW-1433], <sequence-number>,, WARNING, <system-name>, Switch status
change contributing factor CP: CP non-redundant.