Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

264 Fabric OS Message Reference
53-1001157-01
FW-1312
35
FW-1312
Message <timestamp>, [FW-1312], <sequence-number>,, INFO, <system-name>, <Label>, value
has changed(High=<High value>, Low=<Low value>). Current value is <Value> <Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
changed. WSNMP violations indicate that an SNMP “get/set” operation request has been received
from an unauthorized IP address.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity INFO
FW-1313
Message <timestamp>, [FW-1313], <sequence-number>,, INFO, <system-name>, <Label>, is
below low boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
fallen below the low boundary. WSNMP violations indicate that an SNMP “get/set” operation
request has been received from an unauthorized IP address.
Recommended
Action
No action is required.
Severity INFO
FW-1314
Message <timestamp>, [FW-1314], <sequence-number>,, WARNING, <system-name>, <Label>, is
above high boundary(High=<High value>, Low=<Low value>). Current value is <Value>
<Unit>.
Probable Cause Indicates that the number of simple network management protocol write (WSNMP) violations has
risen above the high boundary. WSNMP violations indicate that an SNMP “get/set” operation
request has been received from an unauthorized IP address.
Recommended
Action
Run the errShow command to determine the IP address that sent the request. Responses to
security-class messages depend on user policies. Consult your security administrator for response
strategies and policies.
Severity WARNING