Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

220 Fabric OS Message Reference
53-1001157-01
FSSM-1004
34
Probable Cause Indicates that the active control processor (CP) and the standby CP in a dual CP system are running
firmware that are incompatible with each other. If the active CP fails, the failover will be disruptive.
In a switch system, this message is logged when a firmware upgrade/downgrade was invoked. The
new firmware version is not compatiable with the current running version. This causes a disruptive
firmware upgrade/downgrade.
Recommended
Action
For a dual CP system, run the firmwareDownload command to load compatible firmware on the
standby CP. For details on this command, refer to the Fabric OS Command Reference.
Severity INFO