Manualshelf

Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

ManualsBrandsHP ManualsStorageBrocade 8/24c SAN Switch for BladeSystem c-Class
251252253254255256257258259260
202 Fabric OS Message Reference
53-1001157-01
FICN-1077
28
Recommended
Action
No action is required.
Severity INFO
FICN-1077
Message <timestamp>, [FICN-1077], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:Unloaded:Path=<FICON PATH>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values received from the channel for this
device>:flags=0x<tape report bit flags>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR, which
indicates that a tape should be unloaded on a device.
Recommended
Action
No action is required.
Severity INFO
FICN-1078
Message <timestamp>, [FICN-1078], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:ReadBlkReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host write commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated write megabytes processed while this tape was loaded>
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and write
pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1079
Message <timestamp>, [FICN-1079], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:WriteReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host read commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated read Kilobytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a remotely connected LPAR and Read
Block pipelining was performed on the currently loaded tape.