Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 201
53-1001157-01
FICN-1074
28
Recommended
Action
No action is required.
Severity INFO
FICN-1074
Message <timestamp>, [FICN-1074], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:WriteReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host write commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated write megabytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and write
pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1075
Message <timestamp>, [FICN-1075], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:ReadBlkReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host read commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated read megabytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read
Block pipelining was performed on the currently loaded tape.
Recommended
Action
No action is required.
Severity INFO
FICN-1076
Message <timestamp>, [FICN-1076], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:ReadCpReport:Path=<FICON PATH>:Emuls=0x<the number of idle state to
non-idle state transitions while this tape was loaded>:Cmds=0x<the number of
emulated host read commands processed while this tape was loaded>:Chains=0x<the
number of emulated host chains processed while this tape was loaded>:MBytes=<the
number of emulated read megabytes processed while this tape was loaded>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR and Read
Channel Program pipelining was performed on the currently loaded tape.