Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

200 Fabric OS Message Reference
53-1001157-01
FICN-1070
28
FICN-1070
Message <timestamp>, [FICN-1070], <sequence-number>,, INFO, <system-name>,
DevTapeIngr:Exceptional Status rcvd on Path=<FICON PATH> state=0x<current
emulation state> status=0x<the exceptional status value>.
Probable Cause Indicates the normal end of tape status (0x0D or 0x05) is received from the device or error status
(including Unit Check 0x02) is received from an active emulation device.
Recommended
Action
The end of tape is a normal event during pipelining and not the unit check. If there are associated
IO error messages with this event, please contact your vendor's customer support for assistance.
Severity INFO
FICN-1071
Message <timestamp>, [FICN-1071], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Tape Loaded on Path=<FICON PATH>.
Probable Cause Indicates the tape IOs are processed from a locally connected LPAR, which indicates that a tape is
loaded on a device.
Recommended
Action
No action is required.
Severity INFO
FICN-1072
Message <timestamp>, [FICN-1072], <sequence-number>,, INFO, <system-name>,
DevTapeEgr:Tape Loaded on Path=<FICON PATH>.
Probable Cause Indicates the tape IOs are processed from a locally connected LPAR, which indicates that a tape is
loaded on a device.
Recommended
Action
No action is required.
Severity INFO
FICN-1073
Message <timestamp>, [FICN-1073], <sequence-number>,, INFO, <system-name>,
HostTapeIngr:Unloaded:Path=<FICON PATH>:states=0x<4 prior emulation
states>:cmds=0x<last 4 commands received from the channel for this
device>:status=0x<last 4 status values sent to the channel for this
device>:flags=0x<tape report bit flags>.
Probable Cause Indicates a Rewind and Unload IO has been processed from a locally connected LPAR, which
indicates that a tape should be unloaded on a device.