Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

198 Fabric OS Message Reference
53-1001157-01
FICN-1063
28
Severity ERROR
FICN-1063
Message <timestamp>, [FICN-1063], <sequence-number>,, ERROR, <system-name>, Egress
Abort:Oxid=0x<the OXID of the aborted exchange>:Path=<FICON
PATH>:LastStates=0x<emulation state>.
Probable Cause Indicates an abort operation has been received from a peer FC interface for an active emulation
exchange.
Recommended
Action
This is an unexpected event, contact your vendor's customer support for assistance.
Severity ERROR
FICN-1064
Message <timestamp>, [FICN-1064], <sequence-number>,, INFO, <system-name>, Ingress
Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on GEPort=<GEPort
Number> VEPort=<VEPortNumber> from SID=0x<Source Port> to DID=0x<Destination
Domain><Destination Port>.
Probable Cause Indicates an abort operation has been received from a local FC interface for an exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, contact your vendor's customer
support for assistance.
Severity INFO
FICN-1065
Message <timestamp>, [FICN-1065], <sequence-number>,, INFO, <system-name>, Egress
Abort:Oxid=0x<the OXID of the aborted exchange>:Unknown Path on GEPort=<GEPort
Number> VEPort=<VEPortNumber> from SID=0x<Source Port> to DID=0x<Destination
Domain><Destination Port>.
Probable Cause Indicates an abort operation has been received from a peer FC interface for an exchange.
Recommended
Action
If there were associated IO errors at the same time as this event, contact your vendor's customer
support for assistance.
Severity INFO
FICN-1066
Message <timestamp>, [FICN-1066], <sequence-number>,, WARNING, <system-name>,
MemAllocFailed for GEPort=<GE0 or GE1 Number> VEport=<VEPortNumber> could not
create required structure.