Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

194 Fabric OS Message Reference
53-1001157-01
FICN-1048
28
FICN-1048
Message <timestamp>, [FICN-1048], <sequence-number>,, WARNING, <system-name>,
DevDiskEgr:FICON Cancel received Path=<FICON PATH> state=0x<Current emulation
state of the FICON device> sflags=0x<The current emulation status flags>.
Probable Cause Indicates the operator has cancelled a read or write job.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.
Severity WARNING
FICN-1049
Message <timestamp>, [FICN-1049], <sequence-number>,, WARNING, <system-name>,
ProcessIngTirData:Lost Logical Path for Path=<FICON PATH> Index=<Current
processing index in the TIR data from the locally connected channel or control
unit>.
Probable Cause Indicates a TIR received from a FICON end point indicates that it no longer has an established path
to its peer.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.
Severity WARNING
FICN-1050
Message <timestamp>, [FICN-1050], <sequence-number>,, WARNING, <system-name>,
ProcessEgrTirData:Lost Logical Path for Path=<FICON PATH> Index=<Current
processing index in the TIR data from the remotely connected channel or control
unit>.
Probable Cause Indicates a TIR received from a far side FICON end point indicates that it no longer has an
established path to its peer.
Recommended
Action
This is an unexpected event; contact your vendor's customer support for assistance.
Severity WARNING
FICN-1051
Message <timestamp>, [FICN-1051], <sequence-number>,, INFO, <system-name>, XRC Session
Established: SessID=<SDM Assigned Session ID>, Path=<FICON PATH>.
Probable Cause Indicates a PSF command has been received to initiate an XRC session with the extended DASD
device.