Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 191
53-1001157-01
FICN-1038
28
Probable Cause Indicates a locally connected FICON Channel issued an Establish Logical Path sequence to the
specified FICON Control Unit.
Recommended
Action
No action is required. This is a part of the FICON path activation.
Severity INFO
FICN-1038
Message <timestamp>, [FICN-1038], <sequence-number>,, ERROR, <system-name>,
fcFicIngHost:FDCB Lookup failed for Path=<FICON PATH>.
Probable Cause Indicates a locally connected FICON channel sent a frame that could not be associated with a
FICON device.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1039
Message <timestamp>, [FICN-1039], <sequence-number>,, ERROR, <system-name>, HostIng:FCUB
Lookup failed for Path=<FICON PATH>.
Probable Cause Indicates a locally connected FICON channel sent a frame that could not be associated with a
FICON Control Unit.
Recommended
Action
Contact your vendor's customer support for assistance.
Severity ERROR
FICN-1040
Message <timestamp>, [FICN-1040], <sequence-number>,, ERROR, <system-name>,
HostTapeEgr:Tape:CmdReject Sense Data Rcvd:Path=<FICON PATH> LastCmds=0x<Last 4
commands received from the channel for this device> SenseData:Bytes0-0xB=0x<FICON
device Sense Data bytes 0-11>.
Probable Cause Indicates an active disk emulation device received a FICON Purge Path from the channel.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
customer support for assistance.
Severity ERROR