Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

188 Fabric OS Message Reference
53-1001157-01
FICN-1026
28
FICN-1026
Message <timestamp>, [FICN-1026], <sequence-number>,, INFO, <system-name>,
DevTapeIng:UnusualStatus:WriteCancelSelr:Generating Final Ending Status
Path=<FICON PATH>.
Probable Cause Indicates the FICON tape write pipeline is completing an emulated Selective Reset sequence.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
customer support for assistance.
Severity INFO
FICN-1027
Message <timestamp>, [FICN-1027], <sequence-number>,, ERROR, <system-name>,
DevTapeIng:Device level exception found for Path=<FICON PATH>: Oxid=0x<The OXID of
the frame that included the Device Level Exception>.
Probable Cause Indicates an active emulation device delivered a Device Level Exception frame to the emulation
processing.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1028
Message <timestamp>, [FICN-1028], <sequence-number>,, ERROR, <system-name>,
HostDiskIng:FICON Cancel received Path=<FICON PATH> state=0x<The current
emulation state of the device>.
Probable Cause Indicates an active emulation device received a cancel operation from the FICON channel.
Recommended
Action
If there was an unexpected job failure or IO Error associated with this event, contact your vendor's
customer support for assistance.
Severity ERROR
FICN-1029
Message <timestamp>, [FICN-1029], <sequence-number>,, ERROR, <system-name>,
HostDiskIng:FICON Selective Reset:Path=<FICON PATH> state=0x<The current
emulation state of the device> LastCmds=0x<The last 4 commands received from the
channel for this device> LastStatus=0x<The last 4 status values presented to the
channel for this device>.
Probable Cause Indicates an active disk emulation device received a Selective Reset from the FICON channel.