Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 177
53-1001157-01
FCR-1080
27
Recommended
Action
Change the matrix database.
Severity WARNING
FCR-1080
Message <timestamp>, [FCR-1080], <sequence-number>,, WARNING, <system-name>, The pause
response timer for domain <Domain> expired.
Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has not responded to the pause
message which prevented the protocol from completing. Any data traffic disruption observed
during the firmware download may have been due to the rejected pause message.
Recommended
Action
Severity WARNING
FCR-1081
Message <timestamp>, [FCR-1081], <sequence-number>,, WARNING, <system-name>, The pause
message is rejected by the domain <Domain>.
Probable Cause During the Coordinated HotCode protocol, a switch in the fabric has rejected the pause message
which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been due to the rejected pause message.
Recommended
Action
Severity WARNING
FCR-1082
Message <timestamp>, [FCR-1082], <sequence-number>,, WARNING, <system-name>, The pause
retry count is exhausted for the domain <Domain>.
Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message
which prevented the protocol from completing. Any data traffic disruption observed during the
firmware download may have been due to this issue.
Recommended
Action
Severity WARNING