Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 101
53-1001157-01
Chapter
16
CVLMSystem Messages
CVLM-1001
Message <timestamp>, [CVLM-1001], <sequence-number>,, ERROR, <system-name>, Failed to
allocate memory: (<function name>).
Probable Cause Indicates that the specified function failed to allocate memory.
Recommended
Action
• Check memory usage on the switch using the memShow command.
• Reboot or power cycle the switch.
Severity ERROR
CVLM-1002
Message <timestamp>, [CVLM-1002], <sequence-number>,, ERROR, <system-name>, Failed to
initialize <module> rc = <error>.
Probable Cause Indicates that an initialization of a module within the CVLMD failed.
Recommended
Action
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS
Command Reference Manual for more information on this command.
Severity ERROR
CVLM-1003
Message <timestamp>, [CVLM-1003], <sequence-number>,, INFO, <system-name>, Crypto device
configuration has been committed by switch (<Switch WWN>).
Probable Cause Indicates --commit operation status.
Recommended
Action
No action is required.
Severity INFO
CVLM-1004
Message <timestamp>, [CVLM-1004], <sequence-number>,, WARNING, <system-name>, Crypto
device configuration between local switch (<local switch WWN>) and peer (<peer
switch WWN>) is out of sync. New encryption session is not allowed.