Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

Fabric OS Message Reference 97
53-1001157-01
CVLC-1009
15
Severity ERROR
CVLC-1009
Message <timestamp>, [CVLC-1009], <sequence-number>,, ERROR, <system-name>, Wrong device
type: should be <Expected device type (Disk/Tape)>, found <Discovered device type
(Disk/Tape)>.\nContainer: <Target container name>, Initiator: <Initiator physical
WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the wrong device type was found.
Recommended
Action
No action is required.
Severity ERROR
CVLC-1010
Message <timestamp>, [CVLC-1010], <sequence-number>,, ERROR, <system-name>, Tape license
is required for tape container: <Target container name>.
Probable Cause Indicates that the tape container is configured with non-Brocade mode but there is no valid license.
Recommended
Action
Obtain license for non-Brocade mode.
Severity ERROR
CVLC-1011
Message <timestamp>, [CVLC-1011], <sequence-number>,, ERROR, <system-name>, Third party
license is required for encryption LUN in third party mode.\nContainer: <Target
container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the encryption LUN is configured with non-Brocade mode but there is no valid
license.
Recommended
Action
Obtain license for non-Brocade mode.
Severity ERROR
CVLC-1012
Message <timestamp>, [CVLC-1012], <sequence-number>,, ERROR, <system-name>, Disk metadata
is in wrong format (<Metadata format found (Brocade/Third party)>).\nContainer:
<Target container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the metadata found on the disk LUN is in the wrong format.