Brocade Fabric OS Message Reference guide v6.2.0 (53-1001157-01, April 2009)

96 Fabric OS Message Reference
53-1001157-01
CVLC-1004
15
CVLC-1004
Message <timestamp>, [CVLC-1004], <sequence-number>,, INFO, <system-name>, Forceful
encryption LUN removal while re-key session is still active.\nContainer: <Target
container name>, Initiator: <Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that the encryption LUN was forcefully removed while a re-key session was still active.
Recommended
Action
No action is required.
Severity INFO
CVLC-1005
Message <timestamp>, [CVLC-1005], <sequence-number>,, INFO, <system-name>, There is no
LUN's found from the target.\nContainer: <Target container name>, Initiator:
<Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that there are no LUNs found from the target-initiator pair.
Recommended
Action
No action is required.
Severity INFO
CVLC-1006
Message <timestamp>, [CVLC-1006], <sequence-number>,, INFO, <system-name>, Duplicate LUN
serial number <LUN SN> found.\nContainer: <Target container name>, Initiator:
<Initiator physical WWN>.
Probable Cause Indicates that there is more than one LUN serial number discovered from the same target.
Therefore, encryption on this target is disabled.
Recommended
Action
No action is required.
Severity INFO
CVLC-1008
Message <timestamp>, [CVLC-1008], <sequence-number>,, ERROR, <system-name>, LUN discovery
failure: <Discovery state>, Container: <Target container name>, Initiator:
<Initiator physical WWN>, LUN ID: <LUN ID>.
Probable Cause Indicates that LUN discovery failed.
Recommended
Action
No action is required.