Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

60 Fabric OS Command Reference

53-1001186-01

burninErrShow

Displays errors stored in nonvolatile memory on a slot during burn-in.

Synopsis burninerrshow slotnumber

Description Use this command to display errors generated during burn-in and stored in nonvolatile memory on

a specified slot.

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands The following operand is required:

slotnumber A nonzero value that specifies the slot number from which to display burn-in

errors.

Examples To display burn-in errors from slot 2:

switch:admin> burninerrshow 2