Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 767
53-1001186-01
switchShow
2
sw Shortwave laser
w Longwave laser
cu copper
id serial ID
Speed The speed of the port:
1/8G 125 Mbps
1/4G 250 Mbps
1/2G 500 Mbps
1G 1 Gbps fixed transfer speed
N1 1 Gbps negotiated transfer speed
2G 2 Gbps fixed transfer speed
N2 2 Gbps negotiated transfer speed
4G 4 Gbps fixed transfer speed
N4 4 Gbps negotiated transfer speed
8G 8 Gbps fixed transfer speed
N8 8 Gbps negotiated transfer speed
10G 10 Gbps fixed transfer speed
N10 10 Gbps negotiated transfer speed
AN Auto negotiating
UN Unknown
State Port state information:
No_Card No interface card present.
No_Module No module (GBIC or other) present.
Mod_Val Module validation in process.
Mod_Inv Invalid module.
No_Light The module is not receiving light.
No_Sync The module is receiving light but is out of sync.
In_Sync The module is receiving light and in sync.
Laser_Flt The module is signaling a laser fault.
Port_Flt The port is marked faulty.
Diag_Flt The port failed diagnostics.
Lock_Ref The port is locking to the reference signal.
Testing The port is running diagnostics.
Offline A port connection is not established (for virtual ports only).
Online The port is up and running.