Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

756 Fabric OS Command Reference
53-1001186-01
supportShowCfgEnable
2
supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
Synopsis supportshowcfgenable os | exception | port | fabric | services | security | network | portlog |
system | extend | filter | perfmon | ficon | iswitch | asic_db |ag | crypto
Description Use this command to enable a group of commands to be displayed under the supportShow
command. Use the supportShowCfgDisable command to disable groups of commands.
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may
be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command
Availability" for details.
Operands This command has the following operands:
os Enables the OS group commands.
exception Enables the exception group commands.
port Enables the port group commands.
fabric Enables the fabric group commands.
services Enables the service group commands.
security Enables the security group commands.
network Enables the network group commands.
portlog Enables the portlog group commands.
system Enables the system group commands.
extend Enables the extend group commands.
filter Enables the filter group commands.
perfmon Enables the Performance Monitor group commands.
ficon Enables the FICON group commands.
iswitch Enables the FC Router group commands.
asic_db Enables the ASIC DB group commands.
iscsi Enables the ISCSI group commands.
ag Enables the AG group commands.
crypto Enables the encryption group commands.
Examples To enable a group of commands under the supportShow command:
switch:admin> supportshowcfgenable os
Config update Succeeded
See Also supportShow, supportShowCfgDisable, supportShowCfgShow