Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 21
53-1001186-01
ag
2
ag
Enables Access Gateway (AG) and manages AG-specific operations.
Synopsis ag --help
ag --show
ag --modeshow | --modeenable |--modedisable
ag [--policyenable | --policydisable] policy
ag --policyshow
ag --mapshow [N_Port]
ag [--mapset | --mapadd |--mapdel] N_Port [F_Port1; F_Port2;...]
ag --pgshow [pgid]
ag --pgcreate- pgid “N_Port1 [;N_Port2;...]” [-n pgname]
ag [--pgadd | --pgdel] pgid “N_Port1 [; N_Port2;...]”
ag --pgrename pgid newname
ag --pgremove pgid
ag [--
failoverenable | --failoverdisable] N_Port
ag --failovershow [N_Port]
ag [--failbackenable | --failbackdisable] N_Port
ag --failovershow [N_Port]
ag [--prefset | --prefdel ] "F_Port [;F_Port2;...]" N_Port
ag --prefshow
ag [--adsset | --adsadd | --adsdel] "F_Port [;F_Port2;...]" "WWN [;WWN2;...]"
ag --adsshow
Description Use this command to perform the following Access Gateway management functions:
• Enable or disable Access Gateway mode.
• Display current configuration and state of AG.
• Configure and display F_Port to N_Port mapping.
• Configure N_Port failover and failback policies.
• Configure and display Port Group policy.
• Create or remove a Port group.
• Display Port Groups and Member N_Ports.
• Add or delete N_Ports in Port group.
• Display all policies and their status.
• Enable or disable Auto Port configuration policy.
• Enable or disable preferred Secondary N_Port policy.
• Enable, disable, and manage Advanced Device Security (ADS) policy.