Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 427

53-1001186-01

licenseRemove

Removes the license key from the system.

Synopsis licenseremove "license"

Description Use this command to remove an existing license key from a switch. The existing license key must

be entered exactly as shown by licenseShow, including case.

When the key has been entered, use the licenseShow command to verify that the key has been

removed and the licensed product uninstalled.

After removing a license key, the switch must be rebooted. With no license key, licenseShow

displays “No licenses.”

Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may

be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command

Availability" for details.

Operands The following operand is required:

"license" Specify the license key, in quotation marks. This operand is required

Examples To remove a license key from the switch:

switch:admin> licenseremove "bQebzbRdScRfc0iK"

removing license key "bQebzbRdScRfc0iK"

See Also licenseAdd, licenseHelp, licenseIdShow, licenseShow