Brocade Fabric OS Command Reference Manual v6.2.0 (53-1001186-01, April 2009)

Fabric OS Command Reference 245

53-1001186-01

fcrPathTest

DIAG-STATS The ASIC internal error counters detected an error in the received frame. This

error is similar to ERRSTATS, but includes verifying the Tx/Rx frame count

statistics. The DIAG-STATS error can be caused by a faulty SFP or indicate

deeper problems in the main board or ASIC. Check for a faulty SFP. Replace

the cable or SFP if necessary.

DIAG-TIMEOUT The port failed to receive back a frame that was sent out. This can be caused

by a faulty SFP or indicate deeper problems in the main board or ASIC. Check

for a faulty SFP. Replace the SFP if necessary.

DIAG-XMIT The specified port failed to transmit frames. This usually indicates an ASIC

failure. Replace the blade or the switch.